Casablanca Fan Company CASA4T User Manual
1
ADAPT•TOUCH™
ADAPT•TOUCH™
Remote Fan & Light Control
Model W-52
Model W-52
Ratings: 120 VAC, 60 Hz, 1.0 Amp Fan
300 Watts incandescent light
Receiver Weight: 6 oz.
300 Watts incandescent light
Receiver Weight: 6 oz.
READ AND SAVE THESE INSTRUCTIONS
CAUTION: RISK OF ELECTRICAL SHOCK!
All wiring must be performed in accordance with national and local electrical codes. If you are unfamiliar with the
wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equip-
ment, do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or transformer-
supplied appliance. Use only to control one paddle-blade ceiling fan and attached incandescent light fixture.
All wiring must be performed in accordance with national and local electrical codes. If you are unfamiliar with the
wiring codes, you should use a qualified electrician. To avoid overheating and possible damage to other equip-
ment, do not install control to a receptacle, fluorescent light fixture, motor operated appliance, or transformer-
supplied appliance. Use only to control one paddle-blade ceiling fan and attached incandescent light fixture.
NOTES:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including interfer-
ence that may cause undesired operation.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3. For use only with Casablanca 3-Speed ceiling fans that use the Hang•Tru® canopy mounting system. Not for use with
other brands of ceiling fans.
other brands of ceiling fans.
4. Medium and Low fan speeds are determined by the Adapt•Touch™ control and thus may vary from the factory settings
due to normal motor variations.
due to normal motor variations.
BEFORE INSTALLING THE ADAPT•TOUCH™ CONTROL
Step 1. Use the pull-chain switch to set the fan speed to the
HIGH position before installation. Do not use the pull-chain
to change the fan speed after installation, as damage to your
ceiling fan or Adapt•Touch™ control may result. The speed
of the fan should only be changed by the Adapt•Touch™
control.
HIGH position before installation. Do not use the pull-chain
to change the fan speed after installation, as damage to your
ceiling fan or Adapt•Touch™ control may result. The speed
of the fan should only be changed by the Adapt•Touch™
control.
Step 2. Set the ceiling fan light kit to the ON position before
installation. The light level should only be changed by the
Adapt•Touch™ control.
installation. The light level should only be changed by the
Adapt•Touch™ control.
P/N: 8943170 P/D: DEC99PDG