Codan Radio Communications VT-3A130-F User Manual
Audio Specifications
Parameter Specification
Reference
Audio Input
-30 to 0 dBm into a 600Ω balanced load
Audio Frequency Response
Flat audio; +1/-5 dB: 350 Hz - 2.5 kHz
RTCA DO-186A
Paragraph 2.3.5.1
Paragraph 2.3.5.1
Audio Frequency Distortion
1 kHz tone, 50kHz Low Pass Filter
Less than 5%+25˚C at 85% modulation
Less than 10% -40˚C to +60˚C at 85% modulation
Less than 15% >+40˚C to +60˚C
Less than 5%+25˚C at 85% modulation
Less than 10% -40˚C to +60˚C at 85% modulation
Less than 15% >+40˚C to +60˚C
RTCA DO-186A
Paragraph 2.3.4
Paragraph 2.3.4
Synthesizer Specifications
RF Power Output:
+3 dBm Nominal
Physical Specifications
Physical Dimensions:
Width:
7.1 cm (2.8 in)
7.1 cm (2.8 in)
Height:
12.8 cm (5.05 in)
12.8 cm (5.05 in)
Depth:
19 cm (7.5 in)
19 cm (7.5 in)
Module Weight:
1.4 kg (3.0 lb.)
Corrosion Prevention:
Anodized aluminum construction. Stainless steel hardware. Selectively conformal
coated glass epoxy 2 and 4 layer printed circuit boards. Gold plated module
connectors.
coated glass epoxy 2 and 4 layer printed circuit boards. Gold plated module
connectors.
Module Design:
Compact Eurostandard modular design. Plug-in modules mate with Daniels
standard MT-3 repeater subrack. Subracks and modules comply with IEEE 1101,
DIN 41494 and IEC 297-3 (mechanical size / modular arrangement).
standard MT-3 repeater subrack. Subracks and modules comply with IEEE 1101,
DIN 41494 and IEC 297-3 (mechanical size / modular arrangement).
External Connections:
RF Connection: Type N connector located on the transmitter module front panel.
Motherboard Connections (Audio, Power, and Control) are made through a 48 pin,
gold plated, type F connector on the rear of the transmitter module. User
connection is made through a mated “mother board” assembly of the repeater
subrack. Type F standard connector complies with DIN 41612 Level 2 (200 mating
cycles, 4 day 10 ppm SO2 gas test with no functional impairment and no change
in contact resistance).
Motherboard Connections (Audio, Power, and Control) are made through a 48 pin,
gold plated, type F connector on the rear of the transmitter module. User
connection is made through a mated “mother board” assembly of the repeater
subrack. Type F standard connector complies with DIN 41612 Level 2 (200 mating
cycles, 4 day 10 ppm SO2 gas test with no functional impairment and no change
in contact resistance).
Frequency Select Handle
Performance Specifications
Performance Specifications
Temperature Range:
-30°C to +60°C.(Optional -40°C to +60°C)
Supply Voltage:
+9.5 VDC
Supply Current:
Less than 35 mA operate; less than 4.0 mA standby mode