Advance Security Inc R30 User Manual
4
During programming, if you don’t respond to previous step in 15 seconds, or any time press transmitter’s
button 1, it will exit features programming, which indicates by 3 long chirps.
button 1, it will exit features programming, which indicates by 3 long chirps.
FIRST STAGE:
Push valet
switch times:
switch times:
Chirp, parking
light flash times
light flash times
Turn ignition from
'OFF' to 'ON'
'OFF' to 'ON'
Turn ignition from
'ON' to 'OFF'
'ON' to 'OFF'
Show
1 short chirp
2 short chirps
Select
Feature " ON "
Feature " OFF "
1
1
Current sensor ON
Current sensor OFF
2
2
Chirp ON
Chirp OFF
3
3
Active arming
Passive arming
4
4
Rearm ON
Rearm OFF
5
5
When door close dome light on
(Vehicle equip interior light delay)
No defective chirp reminder.
(Vehicle equip interior light delay)
No defective chirp reminder.
When door close dome light off
(Vehicle no interior light delay)
With defective chirp reminder.
(Vehicle no interior light delay)
With defective chirp reminder.
6
6
Transmitter car-jacking OFF
Transmitter car-Jacking ON
7
7
Ignition car-jacking OFF
Ignition car-jacking ON
8
8
Door car-jacking OFF
Door car-jacking ON
SECOND STAGE:
Push valet
switch times:
switch times:
Chirp parking
light flash times
light flash times
Turn ignition from
'OFF' to 'ON'
'OFF' to 'ON'
Turn ignition from
'ON' to 'OFF'
'ON' to 'OFF'
Show
One short chirp
Two short chirps
Select
Feature " ON "
Feature " OFF "
1
1
Lock/unlock 0.8 sec.
Lock/unlock 3.5 sec.
2
2
2-pulse unlock OFF.
2-pulse unlock ON.
3
3
Passive door lock ON
Passive door lock OFF.
4
4
Ignition on door lock ON
Ignition on door lock OFF
5
5
Ignition off door unlock ON
Ignition off door unlock OFF
6
6
Disarm parking light OFF.
Disarm parking light on 30"
7
7
Password OFF.
Password ON.
NOTE:
For system programming features all returns to presetting "ON", turn the ignition 'on' then 'off'. Within 15
seconds push the valet switch 3 times. (A long chirp.) Then press button 1 and 2 together for 5 seconds, there
will be a confirmation long chirp.
For system programming features all returns to presetting "ON", turn the ignition 'on' then 'off'. Within 15
seconds push the valet switch 3 times. (A long chirp.) Then press button 1 and 2 together for 5 seconds, there
will be a confirmation long chirp.
D. Testing sensors:
In this test mode, this system can test shock sensor sensitivity and other sensor. The installer can save time
to test the shock sensor sensitivity and sensor without using the traditional arming/disarming procedures to
test the sensors.
to test the shock sensor sensitivity and sensor without using the traditional arming/disarming procedures to
test the sensors.
ENTER:
1. System under disarm or valet condition.
2. Turn ignition switch on then off.
3. Within 15 seconds, push valet switch 3 times.
4. There will be a long chirp confirmation to enter the test mode.
1. System under disarm or valet condition.
2. Turn ignition switch on then off.
3. Within 15 seconds, push valet switch 3 times.
4. There will be a long chirp confirmation to enter the test mode.
Trigger sensor
Siren chirps
Negative pin switch
2
Voltage sensor
3
Optional wireless PIR or door switch
5