Advance Security Inc R46 User Manual
VM-KEM1 MANUAL
1. Power On Status: All function Off
2. Learn-in Code:
1. Turn IGNITION OFF to ON (open for 15 seconds)
2. Press VALET SW.OFF/ON 3 times, LED ON turned on and activate learn-in-Code MODE.
2.1 Press Btn”1” to learn the first TX.
2.2 ---- Horn 20ms, one Beep, Press LED OFF/ON once.
2.3 Other Keys automatically activated.
2.4 Back to 2.2.1 learn the next TX, up to 4 TX code.
3. Turn IGN ON to OFF, or 15seconds time-out, ending learn-in-code process: LED OFF
3. Common TX function
TX BUTTON
FUNCTION
REMARK
Lock Door
Horn 1 Chirp
(2 times/3sec ,20ms)
P/L 1 flashing, D/HT
Dimming .
Unlock Door
P/L 2 flashing, D/HT On, Dimming after 30 seconds
-
2-Step Unlock
Press 2 times in 3seconds
+
Silent Lock / Unlock / DUL#2 Press 2 keys at the same time
AUX
0.5 sec
Trunk (CH#2)
0.5sec
On /
0.5sec
Off (Exit Light)
3 sec PANIC
(0.3”On/0.75”Off)
(0.3”On/0.75”Off)
Horn Chirping, P/L flashing 60sec
,
without D/L,D/UL
,
with CH#2
4. FEATURE PROGRAM: ★★:
RED part is Default Setting
4.1 IGN OFF TO ON (open for 15 Sec),VALET SW ON/OFF(6 times), finished in 15 Sec.
4.2 Chirp 6 Beep, LED ON, proceed Setup, as below circumstance
4.3 IGN OFF shutdown FEATURE Mode, Horn Chirp 1 short-sound 1long-sound
4.4 FEATURE TABLE
Press TX
Btn X
One Chirp ,
LED 0.3
LED 0.3
2 Chirps ,
LED 0.3 - 2 pulse
LED 0.3 - 2 pulse
3 Chirps ,
LED 0.3 - 3 pulse
LED 0.3 - 3 pulse
4 Chirps,
LED 0.3 - 4 pulse
LED 0.3 - 4 pulse
Ign “On”TX activates
Ign “On” TX No
function
function
If Ign”On”(AUX, PANIC)
Rearm Off
Rearm On
AUX
Exit Light On 3
minutes
minutes
Exit Light On 5
minutes
minutes
Exit Light On 10
minutes
minutes
Exit Light On 15
minutes
minutes
5 Chirps ,
LED 0.3 - 5 pulse
LED 0.3 - 5 pulse
Exit Light On 20
minutes
minutes
5. D/HT Function:
Dimming Time 5 sec
5 -1. Door Open / Close = D/HT On 20 sec, then Dimming .
5 -2. Remote Door Unlock = D/HT On 30 sec, then Dimming .
5 -3. Ext Car Remote Lock The Door then Dimming
5-4. Ign On D/HT Off then Dimming
1