TFT Inc EAS911PLUS User Manual
1-3
OPERATION KEYS
SPEAKER Key ........................ Turns speaker ON and OFF; monitors inputs
PRINT Key .............................. Commands the printer to print the item shown on the LCD Screen
ENTER, EXIT, UP ................... Assist initial setup and programming of the equipment
and DOWN Keys
and DOWN Keys
REAR PANEL
Audio Inputs ............................ Six audio channels for FCC EAS or NOAA SAME protocol. Balanced or unbalanced,
10 k-Ohms, approx. 0.5 Vp-p to 2 Vp-p.
Internet/Ethernet Inputs.............Two RJ-45 jacks
Data Channels ........................ RS-232, 1200 baud ASCII, two for input and output
Audio Output ........................... -10 to +10 dBm, 600-ohm balanced, XLR connector
On-Air Relay ............................ Relay contact closure, energized when a selected message is decoded for automatic
forwarding or when the Encoder is activated
Message Alert Relay ............... Relay contact closure, energized when an EAS or CAP message is decoded
RS-485 .................................... Twisted pair wiring connection for optional remote control/status module
Speaker Inhibit ........................ Connects to external switch or relay contacts. Normal operation on contact open.
Speaker operation inhibited (muted) on contact closure
COM1, COM2, COM3 ............. Optional features when the COM Port Expander is installed
and COM4
and COM4
MECHANICAL AND ENVIRONMENTAL
Input Power ............................. 117 VAC ±10%, 60Hz, 40 watts maximum.
Operating Temperature ........... 0 °C to 50 °C
Size ......................................... 3.5" x 19" x 16"
Net Weight ............................... Approximately 12 lbs.
Shipping Weight ...................... Approximately 14 lbs.