Seiko Epson Corporation AE-WLU5000 User Manual
List of Safety Symbols (corresponding to IEC60950-1 A2)
177
The following table lists the meaning of the safety symbols labeled on the
equipment.
equipment.
No. Symbol mark
Approved
standards
standards
Description
A
IEC60417
No.5007
No.5007
"ON" (power)
To indicate connection to the mains.
To indicate connection to the mains.
B
IEC60417
No.5008
No.5008
"OFF" (power)
To indicate disconnection from the
mains.
To indicate disconnection from the
mains.
C
IEC60417
No.5009
No.5009
Stand-by
To identify the switch or switch
position by means of which part of the
equipment is switched on in order to
bring it into the stand-by condition.
To identify the switch or switch
position by means of which part of the
equipment is switched on in order to
bring it into the stand-by condition.
D
ISO7000
No.0434B,
IEC3864-B3.1
No.0434B,
IEC3864-B3.1
Caution
To identify general caution when
using the product.
To identify general caution when
using the product.
E
IEC60417
No.5041
No.5041
Caution, hot surface
To indicate that the marked item can
be hot and should not be touched
without taking care.
To indicate that the marked item can
be hot and should not be touched
without taking care.
F
IEC60417
No.6042
ISO3864-B3.6
No.6042
ISO3864-B3.6
Caution, risk of electric shock
To identify equipment that has risk of
electric shock.
To identify equipment that has risk of
electric shock.
G
IEC60417
No.5957
No.5957
For indoor use only
To identify electrical equipment
designed primarily for indoor use.
To identify electrical equipment
designed primarily for indoor use.
H
IEC60417
No.5926
No.5926
Polarity of d.c. power connector
To identify the positive and negative
connections (the polarity) on a piece
of equipment to which a d.c. power
supply may be connected.
To identify the positive and negative
connections (the polarity) on a piece
of equipment to which a d.c. power
supply may be connected.
No. Symbol mark
Approved
standards
standards
Description
I
—
The same as No.8.
J
IEC60417
No.5001B
No.5001B
Battery, general
On battery powered equipment. To
identify a device for instance a cover
for the battery compartment, or the
connector terminals.
On battery powered equipment. To
identify a device for instance a cover
for the battery compartment, or the
connector terminals.
K
IEC60417
No.5002
No.5002
Positioning of cell
To identify the battery holder itself
and to identify the positioning of the
cell(s) inside the battery holder.
To identify the battery holder itself
and to identify the positioning of the
cell(s) inside the battery holder.
L
—
The same as No.11.
M
IEC60417
No.5019
No.5019
Protective earth
To identify any terminal which is
intended for connection to an external
conductor for protection against
electric shock in case of a fault, or the
terminal of a protective earth
electrode.
To identify any terminal which is
intended for connection to an external
conductor for protection against
electric shock in case of a fault, or the
terminal of a protective earth
electrode.
N
IEC60417
No.5017
No.5017
Earth
To identify an earth (ground) terminal
in cases where neither the symbol
No.13 is explicitly required.
To identify an earth (ground) terminal
in cases where neither the symbol
No.13 is explicitly required.
O
IEC60417
No.5032
No.5032
Alternating current
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
To indicate on the rating plate that the
equipment is suitable for alternating
current only; to identify relevant
terminals.
P
IEC60417
No.5031
No.5031
Direct current
To indicate on the rating plate that the
equipment is suitable for direct
current only; to identify relevant
terminals.
To indicate on the rating plate that the
equipment is suitable for direct
current only; to identify relevant
terminals.