Data Critical Corporation 00DT-7000 User Manual
INTRODUCTION
DT-7000 Operator’s Manual, Revision A
5
All information contained herein is subject to the rights and restrictions on the title page.
INTRODUCTION
System Overview
Wireless Medical Telemetry Services (WMTS) Remote Transceivers provide the link
between the patient and the Central Station through the newly approved 608 - 614
MHz Medical Telemetry frequency band. The ambulatory and bedside device trans-
ceivers communicate data to the Central Station through the Access Point transceiver.
In addition, the transceivers are capable of receiving control commands for self-use or
connection transfer.
between the patient and the Central Station through the newly approved 608 - 614
MHz Medical Telemetry frequency band. The ambulatory and bedside device trans-
ceivers communicate data to the Central Station through the Access Point transceiver.
In addition, the transceivers are capable of receiving control commands for self-use or
connection transfer.
The PatientNet ambulatory transceiver is the DT-4500. This transceiver is worn by the
patient and usually carried in a gown pocket or paper pouch, and used with a 6-wire
leadset connected to the electrodes on the patient.
patient and usually carried in a gown pocket or paper pouch, and used with a 6-wire
leadset connected to the electrodes on the patient.
The DT-7000 and 7001 are the PatientNet bedside-device transceivers and are physi-
cally connected to bedside monitors (other manufacturers’ bedside monitors and ven-
tilators).
cally connected to bedside monitors (other manufacturers’ bedside monitors and ven-
tilators).
The DR-10000 Access Point transceiver collects data from the ambulatory and bed-
side transceivers, sends that data to the Central Station, and transmits control data to
the transceiver devices.
side transceivers, sends that data to the Central Station, and transmits control data to
the transceiver devices.
Equipment Site Selection/Location
The DT-7000 transceiver is attached to a bedside device through the use of the adhe-
sive strip or screws.
sive strip or screws.