Data Critical Corporation 01DT-4500 User Manual
DT-4500 Operator’s Manual
2
Information to User
WARNING
This equipme nt has been tested and found to comply with the limits for a CLASS B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and
used in accordance with the instructions contained in this manual, may cause harmful
interference to radio and television communications. However, there is no guarantee that
interference will not occur in a particular installation.
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and
used in accordance with the instructions contained in this manual, may cause harmful
interference to radio and television communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipme nt does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, then the user is encouraged to try to
correct the interference by one or more of the following measures:
be determined by turning the equipment off and on, then the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipme nt and the receiver
•
Connect the equipme nt into an outlet on a circuit different from that of the receiver
•
Consult the dealer or an experienced audio television technician
NOTE: Connecting this device to peripheral devices that do not comply with the CLASS B
require ment or using an unshielded peripheral data cable could also result in harmful
interference to radio or television reception.
require ment or using an unshielded peripheral data cable could also result in harmful
interference to radio or television reception.
Any changes or modifications to the device that are not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipme nt.
responsible for compliance could void the user’s authority to operate this equipme nt.
To ensure that the use of this product does not contribute to interference, it is necessary to
use shielded I/O cables.
use shielded I/O cables.
Overview
The DT-4500 Ambulatory Transceiver provides two-way wireless communication
between analog ECG circuitry and the hospital’s data distribution network. The DT-
4500 is connected to the patient through the ECG lead circuitry and is carried on the
patient in a gown or disposable paper pouch. The ambulatory transceiver converts the
analog ECG patient parameters to a digital format, which is then transmitted to an
Access Point transceiver. The Access Point transceiver distributes the digital data to
the hospital’s data distribution network. The transceiver system includes 6 ECG
leads, accurate waveform notification, data port activity, notification of radio
frequency (RF) link to Access Point, battery status, attendant present switch, nurse
call switch, and two I/O ports for attachment to external medical devices.
between analog ECG circuitry and the hospital’s data distribution network. The DT-
4500 is connected to the patient through the ECG lead circuitry and is carried on the
patient in a gown or disposable paper pouch. The ambulatory transceiver converts the
analog ECG patient parameters to a digital format, which is then transmitted to an
Access Point transceiver. The Access Point transceiver distributes the digital data to
the hospital’s data distribution network. The transceiver system includes 6 ECG
leads, accurate waveform notification, data port activity, notification of radio
frequency (RF) link to Access Point, battery status, attendant present switch, nurse
call switch, and two I/O ports for attachment to external medical devices.
Equipment Site Selection/Location
The transceiver is worn by the patient and is carried either in a gown pocket or
disposable paper pouch. The typical orientation is against the chest with the front
facing out, which minimizes body attenuation losses.
disposable paper pouch. The typical orientation is against the chest with the front
facing out, which minimizes body attenuation losses.