NEC Corporation FC-N22A User Manual
49
U
se
s
s
o
f N
2
2
A
Setting power saving feature
Perform power saving feature from [Power supply option] of Windows. Operation for manually
executing the power saving feature and the time until the machine automatically enter the
power saving mode can be set.
(1) Changing operation to execute the power saving feature
1.
Click [Start]
[Control panel] [Performance and maintenance] [Power
option]
[Detailed settings] tab.
2.
In the [Power button] field, set the operation and the power saving feature to
be executed.
be executed.
When the power switch is pressed
Select the power saving feature to be executed in [When the power switch of the
computer is pressed].
computer is pressed].
When the LCD display is closed
Select the power saving feature to be executed in [When the portable computer is
closed].
closed].
3.
Click the [Apply] button, and then click the [OK] button.
Suspend (standby) state
If you want to suspend jobs on N22A temporarily, you can enter N22A into the suspend
(standby) state to save power consumption.
To suspend (standby) and then resume N22A with the power switch, the setting of the power
switch must be changed.
To enter N22A into the suspend (standby) state in the power-on state manually, follow either of
the procedures below.
(1) Entering the suspend (standby) status
The following three methods are available.
Entering suspend (standby) status from the Windows shutdown menu
Click [Start]
[Shutdown option], and then click [Standby].
Close the LCD display
Enabled when [Standby] is selected in [When the portable computer is closed].
Press the power switch
Press the power switch for about one second while the power is on.
The power lamp blinks in green, indicating the suspend (standby) status.
Enabled when [Standby] is selected in [When the power switch of the computer is
pressed].
Enabled when [Standby] is selected in [When the power switch of the computer is
pressed].
Before you can suspend (standby) and then resume N22A, wait for five seconds or longer
after change of the power lamp status.
after change of the power lamp status.
Do not press the power switch for four seconds or longer to suspend (standby) or resume
N22A.
Pressing the power switch for four seconds or longer causes the power to be turned off
forcibly, which results in erasing of unsaved data.
N22A.
Pressing the power switch for four seconds or longer causes the power to be turned off
forcibly, which results in erasing of unsaved data.