NEC Corporation FC-N22A User Manual
75
U
se
s
s
o
f N
2
2
A
Power-on using LAN controller
When the network server is accessed via an internal LAN, the N22A automatically resumes
from the suspend (standby) or hibernate status. When it is off, it is automatically turned on.
To use the power-on using LAN controller by the LAN built in N22A, the following settings are
required.
Settings associated with BIOS Setup Menu (common to OSs)
1.
Press F2 on the logon screen. The setup menu is displayed.
2.
Select [Power management] from the menu bar and then press Enter. Select
“Power-on using LAN controller”
“Power-on using LAN controller”
“Enabled”, and then press Enter.
3.
Select [Security] from the menu bar, and then select [Network boot setting]
[Keyboard/Mouse Lock]
[Disabled], and then press Enter.
4.
Press F10 and then select
“Yes”.
* Without the setting, keyboard and mouse operations are disabled at remote power-on.
Settings associated with network adaptor
Perform each setting ([Details] and [Power management]) from [Control Panel]
[Network and Internet Connection]
[Network Connections] right-click on [Local Area
Connection]
[Properties] [Configuration].
Used OS
Setting by OS
[Advanced]
Wake from system shutdown
[Enable]
(setting at shipment)
Wake On Lan Triggers
[Automatic]
(setting at shipment)
Windows XP
[Power Management]
Check [Allow this device to bring the computer out of standby.].
Check [Allow this device to bring the computer out of standby.].