Seiko Instruments AB000001 User Manual
-
22
-
4. PAPER SETUP
The printer supports both thermal paper roll and thermal label roll. The printer function setting differs
depending on paper type. See Section 7, Function Settings, for details. Only roll type media is fit to the
printer.
Q
Mounting/Removing the Paper Roll Adapter
The printer supports internal diameters of
∅8 mm, ∅12.0 mm, and ∅25.4 mm. Mount the paper roll
adapter according to the internal diameter of the paper roll to be used. Two types of paper roll adapters
are available. Those have been mounted on the printer prior to shipping.
(1) When using the paper roll of
∅8.0 mm:
Remove both paper roll adapters of
∅12
mm and
∅25.4 mm.
Push the outer lever pin of the paper guide
toward the inside to remove two types of the
paper roll adapters.
(2) When using the paper roll of
∅12 mm:
Mount only the paper roll adapter of
∅12
mm.
Secure the paper roll adapter to the guide
through the lever pins of the adapter.
Push the lever pin into the paper guide
completely.
φ
25.4 mm
φ
12.0 mm
φ
12.0 mm