Seiko Instruments AB000002 User Manual

 

- 

9

 - 

 

 OPERATING PRECAUTIONS 

Please follow the precautions below to enjoy and maintain the full performance of the 

printer. 

 

u  Be careful not to drop or bump the printer on a hard surface. 
u  DO NOT install the printer in direct sunlight or such areas.  Suitable environment for 

the use of the printer is as follows: 

· Ambient temperature: 32

°F to 122°F (0°C to 50°C) 

· Relative humidity: 30 to 80

%RH (noncondensing) 

u  DO NOT install the printer near devices that generate strong electromagnetic fields 

such as a copy machine. 

u  DO NOT install the printer in a location that is subject corrosive gas or  siloxane and 

so on. 

u  DO NOT connect the AC cables of the AC adapter and the battery charger to the 

same outlet with devices that generate noise. 

u  DO NOT open the paper cover during printing. 
u  DO NOT remove or reinstall the interface cable during printing or transmission.  DO 

NOT touch the connectors of the interface cable during printing. 

u  DO NOT cut any sheets of thick paper or label paper with the paper cutter installed in 

the paper outlet.  Failure to follow this instruction may cause a cutting error or make 

the cutting edge dull due to label paper adhesive sticking to the cutter. 

u  Switch the power off when not in use.   
u   Clean the printer using soft, lint-free cloth.  DO NOT use alcohol or other solvent. 
u  Before use, always clean the terminals using a dry, soft, lint-free cloth. If the 

terminals are dirty, it may not be possible to obtain proper contact. 

u  When cleaning the TH, wipe the thermal head with a cotton swab or other soft 

material. 

u  Remove the battery pack from the printer if the printer is not used for a long time. If 

not, it may cause overdischarge and shorten life span of the battery pack. 

u  Store the battery pack in cool place. DO NOT store the battery pack for long time 

with fully charged condition because it may shorten life span of the battery pack.  

u  The battery pack should be recharged at 32 to 95°F (0 to 35°C) for optimum 

performance.