Seiko Instruments AB000002 User Manual

(1) Turn the printer off.

(2) Open the interface connector cover and connect the interface cable. The connector

of serial interface cable has lock for preventing from falling off.

(3) Turn the printer on and send data from the host device to the printer.

(4) Verify that the data is printed correctly.

(5) The serial interface cable connector has a lock. To remove the cable, pull it out,

while holding the lock. Pulling the connecter by force may cause connector

damaged.

NOTE

When plugging or unplugging the interface cable, hold the connector,

not the cable.

DO NOT connect the serial and USB interface cable at the same time.

If doing so, the USB communication mode has priority over the serial

communication.

USB interface cable

Serial interface cable

Lock