Seiko Instruments AB000002 User Manual

HINT

• The printer can print or receive data while it is recharging the battery

pack, too. While printing or receiving data, the POWER lamp lights

continuously and the printer pauses to recharge. The printer recharges

the battery again after printing and receiving data are completed.

• To stop recharging, press the POWER switch. The printer will turn off.

To recharge the battery pack again, repeat the steps shown in (5).

• The battery pack should be recharged at 32 to 95°F (0 to 35°C) for

optimum performance.

• If the Auto Activation by AC function is enabled, the printer turns on

automatically when the AC cable of the AC adapter inserts to the outlet.

See Section 6 Function Setting for details on settings.

(1) Connect the AC cable to the battery charger.

(2) Plug the AC plug of the AC cable to the outlet.

(3) Install a battery pack in the battery charger. Make sure that electrodes of the

battery pack contact the terminals of the metal on the battery charger.

(4) The battery charger CHARGE lamp (red) will light and the battery charger will start

recharging.

(5) When the CHARGE lamp turns its lamp to green color, the battery pack is

sufficiently recharged.

(6) When recharging is complete, remove the battery pack.

(7) Unplug the AC plug of the AC cable to the outlet.

AC cable

Battery charger

Battery pack