Seiko Instruments AB000003 User Manual
-
10
-
be used may be shortened.
High-print-rate printing or using the printer under low temperature condition might
cause irregular printouts or generate loud noise. This is not a failure in the printer,
but an inherent paper phenomenon.
but an inherent paper phenomenon.
When using a Bluetooth interface, the radio environment around the printer may
cause a failure in communications. This is due to the specifications of Bluetooth,
which is a radio communications standard.
which is a radio communications standard.
When handling this product, be aware of static electricity. If the static electricity is
discharged, this could case communication failure. When this problem occurs,
disconnect the USB connector that is connected to the host device and wait few
seconds before connect it again.
disconnect the USB connector that is connected to the host device and wait few
seconds before connect it again.
Thermal Paper Handling
Store the thermal paper in a cool, dry, and dark place.
DO NOT rub the paper with hard objects.
DO NOT leave the paper near organic solvents.
DO NOT allow plastic film, erasers, or adhesive tape to touch the paper for long
DO NOT rub the paper with hard objects.
DO NOT leave the paper near organic solvents.
DO NOT allow plastic film, erasers, or adhesive tape to touch the paper for long
periods.
DO NOT stack the thermal paper with diazo copies immediately after copying or wet-
type copies.
DO NOT use chemical glue.
Always use the specified thermal paper. See Section 12, Options and Consumable
Always use the specified thermal paper. See Section 12, Options and Consumable
Parts, for details.
Precautions on Discarding
When discarding used printers, discard them according to the disposal regulations and
rules of
rules of
each respective district.