Seiko Instruments AB000003 User Manual
-
14
-
(6) Interface connector
The interface connector connects with the
interface cable. Open the rubber cover
and insert the connector.
interface cable. Open the rubber cover
and insert the connector.
(7) Paper outlet
Paper port with a paper cutter.
(8) Thermal head
The thermal head prints characters on the
thermal paper. Note that the thermal head
is very hot immediately after printing.
thermal paper. Note that the thermal head
is very hot immediately after printing.
(9) Paper sensor
The sensor that detects thermal paper
existence or paper mark.
existence or paper mark.
(10) Paper cover open button
The button that is used as opening the
paper cover when setting the thermal
paper.
paper cover when setting the thermal
paper.
(11) Paper cover
The platen roller is released from the
thermal paper after opening this cover.
Open this cover to replace the thermal
paper or to clean the thermal head.
thermal paper after opening this cover.
Open this cover to replace the thermal
paper or to clean the thermal head.
(12) Platen roller
The platen roller brings the paper in
contact with the thermal head. The platen
roller is turned to feed the paper.
contact with the thermal head. The platen
roller is turned to feed the paper.
(13) Power connector
The power connector connects the AC
adapter to this connector.
adapter to this connector.
(14) Battery cover
The battery cover is attached on the
printer to secure the battery pack.
printer to secure the battery pack.