Seiko Instruments AB000003 User Manual

 

- 

19

 - 

 4 PAPER SETTING 

This printer can feed the paper roll.  The printer function setting for cut sheets is 
different from that for paper roll.  See Section 6 Function Setting for details. 
 

(1) Push the paper cover open button to open the paper cover in the direction of the 

arrow.  

(2) Install the paper roll into the paper holder and make sure that the tip of the thermal 

paper 5 cm or longer appears from the paper outlet and the thermal paper is set 
straightly. 

(3) Certainly press both sides of the paper cover and close it. 
(4) When using the marked paper roll, press the FEED switch once to feed the paper roll 

to the home position after setting the marked paper roll into the paper holder. 

 

 

NOTE 

-  DO NOT block the paper outlet or hold the thermal paper that is being 

loaded.  Otherwise, it may cause a paper jam. 

- 

DO NOT touch the platen roller or the printer gear. If doing so, this may 
result in poor print quality or malfunction of the printer. 

HINT 

  Leaving the printer with the thermal paper that is in the thermal head and 

platen roller for a long time, which may cause paper feeding error.  In that 
case, open the paper cover to release the thermal head and the thermal 
paper before using, and then close the paper cover. 

 

Certainly press both sides of the 
paper cover and close it.