Seiko Instruments AB000003 User Manual

 

- 

23

 - 

 

 

 

When the message shown at the following is printed in the function setting mode, 

press the POWER switch. 

Load Default Setting? 

Yes: Feed SW / No: Power SW 

 

HINT 

  There are SWDIP switches from 1 to 4 in the printer, so set 8 bits within 

SWDIP switches respectively. 

  In function setting mode, the POWER lamp blinks once by pressing 

either the POWER switch or the FEED switch.  Be sure to confirm the 

POWER lamp blinking in order to ensure proper operation. 

 

  If pressing the FEED switch when the message shown at the following is 

printed, the function setting mode goes to operation (2). 

 

If pressing the POWER switch instead of the FEED switch, the details of the 

printed SWDIP switch (SWDIP switch 1) are not changed, and the next 

SWDIP switch is selected (operation 1). 

DIP Switch setting mode. 

DIP SW-1=********  

Change Setting? 

Yes: Feed SW / No: Power SW 

 

HINT 

  "********" in the message indicates the setting of the SWDIP switch.  The 

leftmost bit is the most significant bit (SWDIP*-8) and the rightmost bit is 

the least significant bit (SWDIP*-1). 

  If SWDIP switches 1 to 4 are skipped, the function setting mode can be 

terminated (operation 3).