Dongbu Daewoo Electronics Corporation 7NFCMC523X User Manual

7

If you use the monitor with a computer which complies
with the power saving program, you can set the monitor
to go blank when the system has remained unused for a
period of time.  To specify the period or to disable this
feature, set the system timeout field of the computer’s
system setup program or use special software for power
saving.  See the computer user’s manual for the details of
using the system setup.  While the monitor is in power
saving mode (blank screen), it consumes less power than
normal state; the color of the power LED will indicate the
state.  To restore the screen image, press any key of your
keyboard or move your mouse.  If the signal cable is
connected loosely or disconnected, the power saving
feature will operate.

If you use the monitor with a computer which complies
with DDC1/2B/2Bi/2B

+

of VESA, the Host-Video Card

automatically configures itself without your intervention
in a way that best fits the attached monitor.  The Display
Data Channel, DDC, allows the monitor to inform the
host system about configuration information for optimum
use of the monitor.  Use of the Video Card utility is not
required to match the resolutions and refresh rates of the
monitor and video card.

6

Move cursor to the right window from the
MENU window

Increase the value of any selected FUNCTION

Move cursor to the left window from the
MENU window

Decrease the value of any selected FUNCTION

Launch OSD(On-Screen Display) MENU
window

Move cursor to the high window from the
MENU window

Move cursor to the low window from the
MENU window