Park Air Systems Limited B6350 User Manual

Page of 73
Chapter 1.
AM-Voice Overview
This chapter provides an introduction to using the T6T transmitter in AM-voice mode.
INTRODUCTION TO AM-VOICE MODE
In AM-voice mode, the T6T transmitter operates in the frequency range 118 to 136.975 MHz using
25 kHz or 8.33 kHz channel spacing. The transmitter produces a 50 watt carrier output that can be
reduced, in 1 watt steps, to 5 watts. The output power, and the majority of operational settings, can be
selected at the front panel or through a compatible control and data system such as the PAE
Multi-Access Remote Control (MARC) system.
A multi-channel feature allows up to 100 frequency channels to be stored and recalled by channel
number. In AM voice mode, and when 25 kHz channel spacing is used, the transmitter can operate with
a 2, 3, 4, or 5 carrier-offset frequency in accordance with ICAO Annex 10.
CARRIER OFFSET OPERATION
In AM voice mode the transmitter can offset the carrier frequency to provide 2, 3, 4, or 5-carrier offset to
meet the requirements of ICAO Annex 10. Offsets are selected using the front panel Scroll/Select control
and the LCD display. The offsets are:
2-carrier offset:
carriers are spaced at
±
5 kHz.
3-carrier offset:
carriers are spaced at zero, and
±
7.3 kHz.
4-carrier offset:
carriers are spaced at
±
2.5 kHz and
±
7.5 kHz
5-carrier offset:
carriers are spaced at zero,
±
4 kHz and
±
8 kHz
Note ...
For 5-carrier offset operation, transmitter variant B6350OPT1 must be used.
T6T AM-Voice Operation
Section 2
Page 3