Park Air Systems Limited B6350 User Manual
CONFIGURATION FOR OPERATION WITH MARC
When the T6T transmitter is used with a MARC system or other compatible control and data system, the
remote signals are connected through the rear panel MARC connector (see Fig. 2-2). In this
configuration, the rear panel Facilities and Computer Port connectors are not used unless some auxiliary
signals available at the Facilities connector are required.
remote signals are connected through the rear panel MARC connector (see Fig. 2-2). In this
configuration, the rear panel Facilities and Computer Port connectors are not used unless some auxiliary
signals available at the Facilities connector are required.
Section 2
T6T AM-Voice Operation
Page 6
Fig. 2-2. T6T Transmitter - Configuration for Use with MARC
Microphone/Headset
for Engineering Use
for Engineering Use
PC for maintenance
purposes
purposes
Frequency Counter for
maintenance purposes
maintenance purposes
Audio
Remote PTT
Control Information
Status Information
Unregulated Supply
MARC
RSE 2
RSE 2
has 8
equipment
connectors
allowing up
to 8 radios
to be
connected
Equipment
Connector
T6T Transmitter
Antenna
Connector
Microphone/Diagnostics
Connector
Reference
Connector
Connector
MARC
Connector
Connector