Park Air Systems Limited B6350 User Manual
Chapter 3.
AM-Voice Installation
This chapter details the installation procedures that are applicable only to AM-voice operation.
WARNING. LETHAL VOLTAGES!
The instructions given in this chapter involve connecting lethal voltages to the
transmitter. The instructions detailed in this chapter must be carried out only by suitably
qualified personnel.
transmitter. The instructions detailed in this chapter must be carried out only by suitably
qualified personnel.
WARNING. ANTENNA RADIATION!
The antenna used with the transmitter must be installed such that the resultant radiated
field strength is below 10W/m² in areas normally accessible to personnel.
field strength is below 10W/m² in areas normally accessible to personnel.
WARNING. BERYLLIUM/BERYLLIA!
The equipment covered by this handbook contains components containing the highly
toxic material Beryllium and/or its oxide Beryllia. These materials are particularly
hazardous if:
toxic material Beryllium and/or its oxide Beryllia. These materials are particularly
hazardous if:
1.
Beryllium materials are absorbed into body tissues through the skin, mouth,
or wound.
or wound.
2.
The dust created by breakage of Beryllia is inhaled.
3.
Toxic fumes are inhaled from Beryllia/Beryllium involved in a fire.
The components containing Beryllia/Beryllium are: TR5, TR6 and TR9 in the
PA module.
PA module.
WARNING. UNAUTHORIZED MODIFICATIONS!
Changes or modifications made to this equipment that are not expressly approved by
Park Air Electronics, or parties authorized by Park Air Electronics, could void the user’s
authority to operate the equipment.
Park Air Electronics, or parties authorized by Park Air Electronics, could void the user’s
authority to operate the equipment.
CAUTION. ESSDs!
The T6T transmitter's circuitry contains Electrostatic Sensitive Devices (ESSDs).
Personnel must be aware of the precautions necessary to prevent damage to such
devices. During installation all precautions necessary to prevent ESSD damage must be
taken.
Personnel must be aware of the precautions necessary to prevent damage to such
devices. During installation all precautions necessary to prevent ESSD damage must be
taken.
INTRODUCTION
The procedures in this chapter that allow a T6T transmitter to be installed for AM-voice operation are:
q
Selecting the applicable keying method
q
Connecting remote facilities.
T6T AM-Voice Operation
Section 2
Page 9