Park Air Systems Limited B6350 User Manual
TO ENTER STANDBY MODE
Standby mode is a power saving feature that can be used for non-operational transmitters. When in
standby mode, most of the transmitter's circuits are inactive, the LCD is blanked, and the transmitter
cannot be keyed. To put the transmitter into standby mode, use the following procedure.
standby mode, most of the transmitter's circuits are inactive, the LCD is blanked, and the transmitter
cannot be keyed. To put the transmitter into standby mode, use the following procedure.
1.
From the Main screen, press the switch to
display the Options menu. Ensure that
Configure is highlighted. Press the switch.
display the Options menu. Ensure that
Configure is highlighted. Press the switch.
2.
Ensure the Configure menu is displayed.
Turn the switch until Standby is highlighted,
then press the switch.
Turn the switch until Standby is highlighted,
then press the switch.
3.
Check that the Standby menu is displayed.
Turn the switch until Yes is highlighted, then
press
Turn the switch until Yes is highlighted, then
press
the
switch.
[To
abandon
this
procedure, select No instead of Yes and
then press the switch.]
then press the switch.]
4.
Check that the LCD blanks, and the front panel STANDBY indicator lights.
5.
The transmitter is now in standby mode. To exit standby, see the next procedure.
T6T AM-Voice Operation
Section 2
Page 23
F r e q u e n c y
C h a n n e l
C o n f
i g u r e
B I T
E x i
t
S e t t
i n g s
S / W
V e r s i o n s
S t a n d b y
B a c k
E x i
t
P u t
r a d i o
i n t o
S t a n d b y
m o d e
?
Y E S
N O