Digital Monitoring Products Inc 1128 User Manual

I N T R U S I O N • F I R E • A C C E S S • N E T W O R K S

2500 North Partnership Boulevard

Springfield, Missouri 65803-8877

866.266.2826 | DMP.com

LT-1825 18365

Specifications

Battery

Life Expectancy

3 Years (normal operation)

Type

3 V lithium CR123A

Frequency Range

905-925 MHz

Transmit Condition

Alarm, Low Battery, Tamper

Detection Method

Omni-directional

Range

20 ft (6 m)

Operating Temperature -10°C to +55°C
Current Standby
Color

White (passes VW1)

Housing Material

Flame retardant ABS

Dimensions

3.3"L x 2.1"W x 0.9"D

Weight

4.2 oz.

Certifications

FCC Part 15 Registration ID CCK1128

IC Registration ID 5251A-1128

Accessories

5709C-W Glassbreak Simulator

FCC INFORMATION

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause undesired operation.

The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm (7.874 in.) from all

persons. It must not be located or operated in conjunction with any other antenna or transmitter.
Changes or modifications made by the user and not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

INDUSTRY CANADA INFORMATION

This device complies with Industry Canada Licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause interference, and

this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

l’appareil ne doit pas produire de brouillage, et

l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits specified by Health Canada

Safety Code 6. The system must be installed at a minimum separation distance from the antenna to a general bystander of 7.87

inches (20 cm) to maintain compliance with the General Population limits.
L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme aux limites établies

par le Code de sécurité 6 de Santé Canada. Le système doit être installé à une distance minimale de 7.87 pouces (20 cm) séparant

l’antenne d’une personne présente en conformité avec les limites permises d’exposition du grand public.

FIELD

TEST

1128 WIRELESS GLASSBREAK

DETECTOR