Digital Monitoring Products Inc PC0096 User Manual
XT30/XT50 Installation Guide
Digital Monitoring Products
1
Panel sPeCIfICatIons
Panel Specifications
1.1 Power Supply
Transformer Input:
Plug-in — 16.5 VAC 40 VA, Model 321
Wire-in — 16.5 VAC 40 VA, Model 320
Standby Battery:
12 VDC 7.7 Ah (40 VA transformer charges up to 2 batteries)
Auxiliary Output:
12 VDC at 500mA
Bell Output:
12 VDC at 1.5 Amps
Smoke Detector Output: 12 VDC at 100mA
All circuits inherent power limited
Note: Please see NRTL (National Recognized Testing Laboratory) Listed Specifications section for a NRTL
Note: Please see NRTL (National Recognized Testing Laboratory) Listed Specifications section for a NRTL
certificated application.
1.2 Communication
Built-in SDLC Digital Dialer communication to DMP Model SCS-1R Receivers
Built-in network communication to DMP Model SCS-1R Receivers
Built-in cellular communication to DMP Model SCS-1R Receivers
Built-in CID (Contact ID) dialer communication to non-DMP receivers
1.3 Panel Zones
Nine 1k Ohm EOL burglary zones: zones 1 to 9
One 3.3k Ohm EOL Class B powered fire zone with reset capability: zone 10
One 3.3k Ohm EOL Class B powered fire zone with reset capability: zone 10
1.4 Keypads/Expansion
You can connect up to five supervised keypads.
• 32-character alphanumeric keypads
You can connect unsupervised keypads.
• 32-character alphanumeric keypads
• Security Command™, Thinline™, Aqualite™, Clear Touch™, and Icon keypads
• Security Command™, Thinline™, Aqualite™, Clear Touch™, and Icon keypads
In addition, the following zone expanders can be added:
• One, four, eight and 16-zone expansion modules
• Single-zone PIR and glassbreak detectors
• Single-zone PIR and glassbreak detectors
1.5 Number of Zones
Onboard zones 1-10
•
Five keypad bus addresses with zones 11-14, 21-24, 31-34, 41-44, and 51-54 (hardwired or wireless)
•
Zone numbers 31 to 34 and 41 to 44 can support 1100 Series Key Fobs or DMP wireless output modules
•
XT50 has 20 additional onboard wireless zones numbered 80-99
•
1.6 Outputs
The XT30/XT50 panels provide four open collector outputs rated for 50mA each. A Model 300 Output Harness
is required. The open collector outputs provide the ground connection for a positive voltage source.
1.7 Enclosure Specifications
The XT30/XT50 panel ships standard in a 340 enclosure with EOL resistors, battery leads, user’s guide, and
programming sheet. All enclosures are constructed using 20-gauge cold rolled steel.
Enclosure
Model
Size
Color
340
12.5” W x 9.5” H x 2.75” D
Gray (G)
349
12.5” W x 11.25” H x 3.5” D
Gray (G)