Digital Monitoring Products Inc PC0163 User Manual

19

This option specifies the areas to be armed by the Arming Type zone. Press the

appropriate number keys on the keypad to assign areas 1 to 6. When disarmed, all areas

are disarmed.

This option specifies the style for the arming/disarming operation. The default for

STYLE: is TGL (Toggle). Pressing any Select key displays the STYLE options. To view more

style options press the command key. The following is a description of the action for

each option condition.

TGL (Toggle) - When the zone changes from normal to shorted, the programmed areas

toggle between the armed or disarmed condition. When restored to normal, no action

occurs. When the zone is opened from a normal (disarmed) state, a trouble is reported.

When opened from a shorted (armed) state, an alarm is reported and the zone is

disabled until you disarm the area(s) from either the Virtual Keypad App, MyAccess,

Virtual Keypad Browser or a Remote Link™ computer.

ARM - When the zone is shorted, the programmed area is armed. When restored to

normal, no action occurs. When the zone is opened from a normal (disarmed) state, a

trouble is reported. When opened from a shorted (armed) state, an alarm is reported.

DIS (Disarm) - A short will disarm the area. When restored to normal, no action occurs.

When the zone is opened from a normal (disarmed) state, a trouble is reported.

STEP - A short will arm the areas. A normal condition will cause no action. An open

condition will disarm the areas.

Note: When using an arming/disarming keyswitch, locate the keyswitch within the

protected area.

MNT (Maintain) - When the zone is shorted, the programmed area is armed. When

restored to normal, the programmed area is disarmed and any alarm bells are silenced. 

When the zone is opened from a normal (disarmed) state, a trouble is reported. If

opened from a shorted (armed) state, an alarm is reported and the zone is disabled 

until you disarm the area from either the Virtual Keypad App, MyAccess, Virtual Keypad

Browser or a Remote Link™ computer.

When YES is selected, the programming for the zone terminates and the display returns

to ZONE NO: - allowing you to enter a new zone number. Select NO to make changes to

the Alarm Action for a zone.

The Alarm Action section allows you to change or confirm the default alarm

characteristics of a zone type.

If you selected the non-24-hour zone type Blank, Night, Day, Exit, Auxiliary 1, or

Auxiliary 2, the Alarm Action programing begins with Disarmed Open.

If you selected the 24-hour zone type Panic, Emergency, or Supervisory, the Alarm Action

programming begins with Armed Open.

Defines the action taken by the communicator when the zone is opened while the area is 

disarmed. There are three actions to define:

•  Message to Transmit
•  Output/Favorite Number
•  Output Action
You must also make these selections for the Disarmed Short, Armed Open, and Armed

Short zone conditions. Press the COMMAND key to continue.

You can send two report types to the receiver: Alarm and Trouble. These are represented

by the characters A and T. Press any Select key to display the zone report options.

ALARM - Selecting A allows an alarm report to be sent to the receiver. The zone name

appears in the communicator’s alarmed zones status lists.

TROUBLE - Selecting T allows a trouble report to be sent to the receiver and the zone

name to appear in the communicator’s alarmed zones status lists.

LOCAL - When you select L, an alarm report is NOT sent to the receiver. The zone name

appears in the communicator’s alarmed zones status lists.

– (dash) - When you select – , reports are NOT sent to the receiver. There is no display

in the communicator’s alarmed zones status list. Only the programmed Output Number

activates.

AREA: 1 - - - - - 

STYLE:  

TGL  ARM DIS STEP

MNT

NEXT ZN?    NO  YES

ALARM ACTION . . .

DISARMED OPEN

MSG: ALARM

A T  L  -