Digital Monitoring Products Inc PC0190 User Manual
2
iComLNC Installation Guide
TAMPER Z-WAVE DEVICES
Once all Z-Wave devices have been added to the panel, they will need to be tampered to become active.
Follow the directions below to tamper the Z-Wave devices and check each Z-Wave device’s status.
1. Go to each Z-Wave device and tamper it according to the device’s instructions.
2. Once all Z-Wave devices have been tampered, it could take up to five minutes for
2. Once all Z-Wave devices have been tampered, it could take up to five minutes for
associations to take place.
3. After tampering the devices and associations have taken place, go to the keypad and
access
ZWAVE SETUP.
4. Select
LIST then press CMD to advance through the list of Z-Wave devices and ensure each device
displays an
OKAY status. If there are devices that do not display an OKAY status, remove the device
and return to
PROGRAM Z-WAVE DEVICES to start the process over.
PROGRAM Z-WAVE DEVICES
1. At the keypad, press
CMD until MENU? NO YES displays.
2. Select
YES.
3. Enter a user code and press
CMD.
4. Press
CMD until ZWAVE SETUP displays and then press any select key or area.
5. Select
ADD when ADD LIST REMOVE displays.
6. At
PRESS BUTTON ON DEVICE TO ADD, press the button on the Z-Wave device.
The keypad beeps once and displays
DEVICE FOUND. After a few moments, the keypad beeps again
and displays the type of device found and then displays
ADD LIST REMOVE.
7. From here,
ADD another Z-Wave device or press the back arrow until ZWAVE SETUP displays to save
Z-Wave programming.
Use the iComLNC Control Panel Programming Sheet (LT-1783) to program the module and then follow the
directions below to program the Z-Wave devices into the module using a keypad.
3
1. Navigate to the Dealer Admin site (DMPDealerAdmin.com).
2. Click
2. Click
Customers in the right-side menu and select a customer.
3. Click
Add System.
4. Enter a
System Name.
5. Select
iComLNC from the System Type drop-down menu.
6. Select either
Cellular or EASYconnect + Cell Backup as the Connection Type.
7. Enter the
SIM number found on the iComLNC label and click Get Status.
8. Enter the
Account Number.
9. Select a
Rate Plan for the iComLNC.
10. Click
Activate Cellular Device.
Cellular Activation
4