Digital Monitoring Products Inc PC0199 User Manual
XTLtouch Installation Guide | Digital Monitoring Products
6
4. Remove the backing from the flexible
antenna and place it inside the housing.
5. Snap the end of the antenna on to the
265LTE-V-GW antenna patch.
6. Insert the 265LTE-V-GW into the eight-
pin CELL MODULE header, keeping it
parallel to the XTLtouch.
parallel to the XTLtouch.
7. Snap the 265LTE-V-GW on to the
standoff and secure it in place.
8. Replace the base and secure it with the
four screws and the one set screw.
See Figure 4.
See Figure 4.
Figure 4: Connecting the Antenna