Westell Inc. A9080YYXX-07 User Manual
UltraLine II – Draft 1
030-300459 Rev. A
7/12/05
030-300459 Rev. A
46
July 2005
User Guide
UltraLine II (Model 800015)
15.7.3.1 Public LAN – Multiple IP Address Passthrough
If you selected Public LAN from the Select DHCP Network drop-down menu, the following screen will be
displayed. Enter the appropriate values and click Save to save the settings.
NOTE: Selecting Public LAN will enable your computer to have global address ability. To use the Public LAN
feature, your ISP must support Public LAN and Static IP. Contact your ISP for details.
Alternate LAN - Public LAN Settings
Select DHCP Network
Displays the DHCP Network that you have selected.
Enable DHCP Server
Factory Default = Disable
Possible Responses:
If Enabled (box is checked), this will enable the Public LAN DHCP server and
allow IP address to be server from the DHCP Public LAN pool.
If Disabled (box is unchecked), this will disable the Public LAN DHCP server.
Possible Responses:
If Enabled (box is checked), this will enable the Public LAN DHCP server and
allow IP address to be server from the DHCP Public LAN pool.
If Disabled (box is unchecked), this will disable the Public LAN DHCP server.
Modem’s Public IP Address
The Modem’s public IP address
Subnet Mask
The Subnet Mask, which determines what portion of an IP address is controlled
by the network and which portion is controlled by the host.
by the network and which portion is controlled by the host.
Address Range
DHCP Start Address
Displays the first IP address that the Public LAN DHCP Server will provide.
The DHCP Start Address must be within the IP address and lower than the
DHCP End Address.
The DHCP Start Address must be within the IP address and lower than the
DHCP End Address.
DHCP End Address
Displays the last IP address that the Public LAN DHCP Server will provide.
The DHCP End Address must be within the IP address and higher than the
DHCP Start Address.
The DHCP End Address must be within the IP address and higher than the
DHCP Start Address.
DHCP Lease Time
Factory Default = 01:00:00:00
Displays the amount of time the provided addresses will be valid, after which
time the Public LAN DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This
value must be greater than 10 seconds. Seconds must be between 0 and 59,
minutes must be between 0 and 59, and hours must be between 0 and 23.
Displays the amount of time the provided addresses will be valid, after which
time the Public LAN DHCP client will usually re-submit a request.
Note: DHCP Lease Time is displayed in the format (day:hour:min:sec)*. This
value must be greater than 10 seconds. Seconds must be between 0 and 59,
minutes must be between 0 and 59, and hours must be between 0 and 23.
If the settings you have entered in the Public LAN Settings fields are incorrect, the following warnings messages
may be displayed via pop-up screens. If this occurs, check the Public LAN settings.
Warning Message
Check Public LAN DHCP Settings