PRÜFTECHNIK Condition Monitoring GmbH VCRFSU User Manual
56
VIBCONNECT RF 11.2011
Installation and commissioning
• Activate option ‘Wake up level’, and select the vibration level:
5.6.5 Loading measuring configurations to the bridge
After you have set up a measuring configuration for every measur-
ing point in the system, these configurations must be transferred
to the respective bridges:
ing point in the system, these configurations must be transferred
to the respective bridges:
• In the main menu, click
(route to device).
• In the ‘Select Device’ window, select the bridge.
• To start the data transfer, click the <OK> button.
• To start the data transfer, click the <OK> button.
Note
The measuring configuration is only forwarded by the bridge to
the sensor unit after it has “woken up” from its idle phase. To force
instant transmission, switch the sensor unit off and on again.
The measuring configuration is only forwarded by the bridge to
the sensor unit after it has “woken up” from its idle phase. To force
instant transmission, switch the sensor unit off and on again.
5.6.6 Importing measuring data in OMNITREND
Note
The measurement import must be started manually in the
OMNITReND software. ensure that the data is regularly written
to OMNITReND. Otherwise, the memory capacity of the bridge
might be exceeded so the oldest measurements are automatically
overwritten with the latest ones.
to OMNITReND. Otherwise, the memory capacity of the bridge
might be exceeded so the oldest measurements are automatically
overwritten with the latest ones.
• In the main menu, click
(route to device).
The data import starts automatically. If there are several bridges
registered in OMNITREND, they are accessed in sequence.
registered in OMNITREND, they are accessed in sequence.