Thomson Broadcast & Multimedia Inc. 8BUSD2500B User Manual

Page of 40
8
SD2500 TECHNICAL MANUAL
COMWAVE DIVISION
All information contained in this document is confidential and proprietary to THOMCAST and shall not be disclosed without the prior written permission of THOMCAST.
CREATED: KAS...................................................................12/9/99
CHECKED: DMW ................................................................12/9/99
RELEASED: PRC..................................................................12/9/99
Document #: DOC33-0040
REV: DEC.09.99
Parameter
Specification
Notes / Test Conditions
AURAL PERFORMANCE
Output Power
12
15 dB visual/aural ratio
+0.5 dB to -2 dB
Measured at transmitter output
Other ratios available upon request
IF Input Level
Impedance/Connector
-23 dBm peak ± 2 dB
75O / female BNC
Combined visual and aural
Emission
250KF3E or per CCIR
Inter Carrier Frequency Accuracy
±
 50 Hz relative to visual carrier
Frequency Response
13
14
Mono
Stereo
±
 1 dB   30 Hz to 15 KHz
±
 1 dB   50 Hz to 105 KHz w/o pre-
emphasis
Pre-emphasis
50 or 75 microseconds (defeatable)
Deviation
±
25 KHz (System M/N) (
±
50 KHz Stereo)
±
50 KHz (System B/G/D/K/I) NICAM
and IRT Stereo compatible
Harmonic Distortion
13, 14
= 1%
FM Noise
13, 14
= -60 dB
Audio Input Level
13
Mono @ 
±
25 KHz deviation
Mono @ 
±
50 KHz deviation
Stereo @ 
±
50 KHz deviation
-10 to +10 dBm into 600
Ω
-10 to +10 dBm into 600
Ω
-10 to +10 dBm
GENERAL
Power Requirement (Line PF =0.95)
Operating
Stand-by Mode
117/230 V
AC
 ±10%;
 
50/60 Hz
<900 VA
<950 VA
Operating Temperature
0
°
C to +50
°
C
Frequency stability and equipment functionality
guaranteed
Specified Temperature Range
13
°
 to +33
°
C
All Specified parameters guaranteed
Relative Humidity
95% non-condensing
Vertical Rack Requirement
12.25”
Does not include modulator
Dimensions
15.75” H  x  21.1” W  x  34.5” D
40.0cm H  x  53.6 cm W  x 87.6 cm D
Approximate Shipping Weight
215 lb 
(97.40 kg)
                                                                
12
 In band intermodulation specification is based on 15 dB visual to aural ratio.  Contact factory for specification change due to other ratios
13
 Using TVM-102 modulator
14
 Factory video/audio performance test limits may include up to 50% of the test demodulator measurement uncertainty.