Rhine Electronics Co Ltd 7222T434 User Manual
INSTRUCTIONS FOR OPERATION
SETING THE OPERATING CONTROLS
1.
This unit operates on a 12 volts battery (not included).
To prevent possible damage if the battery should leak , be sure to remove
the battery when the unit is not use .
2.
Store the controller away from excess heat or humidity .
3.
This remote control unit is required with 12bit code combinations. To prevent
possible interference from or to other remote units such as garage door
openers, car alarm or security system .
openers, car alarm or security system .
4.
Operation buttons on the panel of transmitter .
FAN HI button – fan speed HI
FAN MED button – fan speed MED
FAN LOW button – fan speed LOW
FAN OFF button - FAN OFF
FAN Reverse button - FAN Reverse
LIGHT button - Light ON/OFF or Dimmer
5.
Start the fan
Press the FAN speed button .
Press the FAN speed button .
6.
Turn off the fan :
Press the OFF button .
7.
Light control :
Turn the light on or off by only touching the LIGHT CONTROL button .
Keep pressing the button in excess of 0.7 second it becomes a dimmer ,
the light varies cyclically in 0.8 second .
Keep pressing the button in excess of 0.7 second it becomes a dimmer ,
the light varies cyclically in 0.8 second .
910805
1