CORE OPTIX Inc. TZC-BH02 User Manual

Handset  (TZC-BH02)
Aluminium charging stand
User manual 

When TZC-BH01 mono handset is used first time after 
purchase, blue and red LED’s blink and it gets into standby 
(pairing) mode if power is on. 

œ Register hands-free(HFP) mode or headset(HSP) 
mode in case of registering TZC-BH01 from mobile phone. 
But, menu composition may be different along the mobile 
phone. Refer to the user’s manual of the mobile phone. 

How to use 

Tone

Indicator

Press power/talk button for more than 3 seconds.

Power is on with beep 
sound

Blue and red LED’s are 
turned on at a time and 
each LED indicates the 
status. 

Power is off with beep 
sound. 

Blue and red LED’s are 
turned on at a time and 
turned off.

If it is registered to the mobile phone, it is connected to the 
first automatically-registered mobile phone when turns off 
and on the handset. 

If presses power/talk button for more than 3 seconds 
while the power of handset is off, beep sound remits and 
blue and red LED’s are turned on and power is turned 
on. 

At this condition, if the hand is not released from the 
button for 1~2 seconds (pressing time while power is 
on) continuously, beep sound emits and blue and red 
LED’s blink fast and it gets into standby mode (pairing). 

Hereafter, proceed with the registration from No. 2) 
connecting handset. 

œ If Smart-stand is not searched during above No. 2) 
Bluetooth device search, turn off and on the handset and 
mobile phone and try the registration again..

œ If it is not connected, check if the Bluetooth function of 
the mobile phone is activated or not.

If completes the registration, beep sound emits every    
5 seconds and blue LED blinks twice.

Search Bluetooth device from Bluetooth setting menu of 
the mobile phone. 

Select Smart-Stand out of the devices in the mobile 
phone. 

œ Please check the compatibility of your products 
before use because there may be some cases they do 
not support the phone function according to the policies 
of products or service operators. 

œ If it passes 5 minutes with disconnected condition, the 
power of handset is turned off automatically. 

If the handset gets out of wireless coverage (within 10m) of 
mobile phone, the connection with the mobile phone is cancelled 
and the handset gets connected with the mobile phone and if 
handset gets close to mobile phone within wireless coverage 
again, the handset is connected with mobile phone automati-
cally.

If requires password in the process of registration, input 
0000.

TZC-BH01 Bluetooth handset is pen-type mono handset which 
applies Bluetooth technology. You can use the functions such 
as phone, internet phone and others the devices provide with 
by connecting this product freely with all mobile phones, smart 
phones, smart pads, notebook computers and desktop 
computers which support the Bluetooth profiles of headset 
(HSP) and hands-free (HFP). 

Receiver

Volume
up/down

Search

Smart-Stand

œ Screen display or connecting method may be different 
along the mobile phone. Refer to the user’s manual of the 
mobile phone. 

Phone-type Bluetooth Mono Handset

TZC-BH02

User Manual

www.tanzency.com

Smart-Stand

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received , including 
interference that may cause undesired
operation.
[Note] The manufacturer is not responsible for AzNY interference, for 
example RADIO or TV interference,
caused by unauthorized modifications to this equipment. Such 
modifications could void the user’s
authority to operate the equipment.

This product is CE marked according to the provision of the R&TTE 
Directive (99/5/EC).
Here by CoreOptix Inc. declares that this product is in compliance with 
the essential requirements and other relevant provisions of Directive 
1999/5/EC.

Bluetooth enables you to use the mobile phone, portable 
device, peripheral device and others freely within the wireless 
range of 10m connecting it with them as the wireless technol-
ogy for short distance. 

œ The coverage may be shortened a bit near the obstacle 
with the strong radio interference and the devices with the 
same frequency range. 

œ੹౵ߑ೧о

ъೠ੢ݒޛ

߂زੌ઱౵ࣻ؀੄

ӝӝ઱߸ীࢲח

ࢎਊѢܻо׮ࣗ

ૣই૕ࣻ੓

णפ׮

࠶ܖైझח

ӔѢܻীࢲ

ോ؀੹ച

ോ؀ਊ ױ݈ӝ

઱߸੢஖

١ਸ

ޖࢶਵ۽

োѾೞחӝࣿ಴ળӏѺਵ۽

N੉ղীࢲ

੗ਬ܂ѱ

োѾೞৈ

ࢎਊೡࣻ੓णפ׮

10m

œ The size adjuster can put reversely to adjust the length 
according to the Mobile size. Carefully reinsert the size 
adjuster not to be breakage.

4J[FBEKVTUFS

4NBSUQIPOF

DSBEMF

$IBSHJOH

QJO

64#DBCMF

power

/talk

button

mic

LED

Reset

hole

$IBSHJOH
QMBUF

The Handset has battery inside. Recommend to fully 
charge the Handset battery before first using. 
 
If the handset place on the stand of Aluminum, it 
recharges automatically. The handset should be located 
on in the middle of stand. 

 If the charging starts, the Red Led light under handset 
will be reflected on the upper side of Aluminum. 
(If run out of battery, please recharge the handset 
fully before using.)

You can use the function of handset during charging. 

Battery charging time is about within 3 hours. 
(If the charging starts, blue LED light is on.)

Do not charge the headset with the charger 
other than the approved one. It may cause the 
breakdown or damage. 

In case battery power is insufficient, warning 
sound emits every 5 seconds and red LED 
blinks twice.