T.W.S. srl 6081-001 User Manual

Page of 5
CU9-6081-001 USER MANUAL
Features
The   CU9-6081-001   main   board   provide   a   totally   integrated   GPS   receiver,   color   video   LCD
controller   and   color   fish   finder   (optional).   The   GPS   receiver   tracks   up   to   13   satellites
simultaneously. The optional fish finder presents vivid underwater images on a high quality LCD.
The main features are
•  LCD display output (5.7-inch or 7-inch color LCD) with brilliance control.
•  Internal GPS receiver provides highly accurate position information.
•  External GPS antenna connection available.
•  SD card slot accepts SD and SDHC cards for external storage of data and settings.
•  CAN bus interface.
•  USB 2.0 optional connection (OTG).
•  Integrated WiFi module with internal antenna. 
•   External WIFI antenna connection available. Only one WIFI antenna works at time (internal or
external) due to integrated antenna switch.
•  SPI keyboard connector.
•  2Gbyte NAND memory.
•  512Mbyte DDR memory.
•  10-32VDC power supply.
LCD display connector
The main board has two LCD connectors P401 as standard and P400 as option.
The P401 connector is for 7" LCFAX060-10-070006 CIVUE LCD display (or equivalent). In this
case the connection between the LCD and the man board uses an 40 pin pitch 0.5 FCC cable.
The P400 connector is for 5.7" FAX060-10-057002 CIVUE LCD display (or equivalent). In this case
the connection between the LCD and the man board uses an 33 pin pitch 0.5 FCC cable.
GPS receiver
The GPS receiver is based on the NEO-6Q UBLOX module.
An  internal active  antenna  can  be used  connected  to  P60 connector, while  the  external active
antenna can be connected to the P601 connector. 
If an external antenna is connected, an integrated antenna switch disconnects the internal antenna
and connects the external one.
Remember to put the internal antenna not very close to the mainboard to improve the GPS signal
receiver quality.
 
SD card and USB connector
Connecting the BKE69 interface to the P51 connector it is possible to have the SD card and USB
connections.
SD card slot accepts SD and SDHC cards.
The USB connector uses the micro USB device standard (OTG as option).
CAN BUS interface
The CAN bus interface complies with the NMEA-2000 standard.
On   this   interface   you   can   connect   GPS   Receiver,   Weather   Station,   FI-50   (instrument   series),
Satellite Compass, etc.
1