Alps Electric UGPZ6-C3 User Manual
User Guide Information for UGPZ6-C3 v2.0
June 2, 2008
Copyright
© 2007 ALPS ELECTRIC CO., LTD.
page4
2.5 Japan
2.5.1 Radio law (TELEC or other registered certificate agency)
The module installer for the end product will not require the certification of TELEC or other registered certificate
agency for the end product, where UGPZ6-C3 module with TELEC or other registered certificate agency
certification shall be incorporated in the following applications.
agency for the end product, where UGPZ6-C3 module with TELEC or other registered certificate agency
certification shall be incorporated in the following applications.
(1) Antenna
The module installer shall use the UGPZ6-C3 module without any modifications including antenna.
If module installer uses a unique antenna, the re-certification to TELEC or other registered certificate agency
will be required for the UGPZ6-C3 module.
will be required for the UGPZ6-C3 module.
Thus, module installer would be required to contact with us before the modification of the antenna.
(2) The outer cabinet of the end product shall be fixed by easily access method, such fixing with plus /
minus screws to open the outer cabinet by general public.
The permanently fixing method, such using security screws are not allowed for mounting method.
The permanently fixing method, such using security screws are not allowed for mounting method.
The labeling to exterior of the end product has a meaning of “Contains transmitter device certified
under Japanese radio law ”, or similar wordings. (see below)
(3) Where outer cabinet of the end product containing UGPZ6-C3 module is secured by the permanently
securing method, such using security screws, the module installer for the end product shall obtain TELEC
or other registered certificate agency certification by themselves for the end product,
even if UGPZ6-C3 module has been certified by TELEC or other registered certificate agency.
or other registered certificate agency certification by themselves for the end product,
even if UGPZ6-C3 module has been certified by TELEC or other registered certificate agency.
The marking on the module is as follows.
2.5.2
Telecommunications law (JATE or other registered testing house)
The end product containing UGPZ6-C3 module shall be certified by JATE or other registered testing
house, where the end product is directly connected to telecommunication line, such public
house, where the end product is directly connected to telecommunication line, such public
telephone, even if UGPZ6-C3 module has been certified by JATE or other registered testing house,
or not.
or not.
The marking on the module is as follows.
2.5.3
Wireless LAN voluntary standard (ARIB)
ARIB STD-T66 is a voluntary standard in Japan.
However, we strongly recommend providing the following application for the end product.
(1) User
However, we strongly recommend providing the following application for the end product.
(1) User
manual.
The user manual specifies the following cautions and explanation of markings indicated on the end
product.
product.
「電波法適合無線設備を内蔵」
（“Contains transmitter device certified under Japanese radio law ” ）
（“Contains transmitter device certified under Japanese radio law ” ）
R 003WWxxxxxxxxx
T xxx-zzzzzzz