AMX WAP250G User Manual
Information
2-3
2
Information
The system information pages display details on the current configuration and status
of the access point, including associated wireless stations and event log messages.
of the access point, including associated wireless stations and event log messages.
System
The system information page displays basic system configuration settings, as well
as the settings for each wireless interface. The displayed settings are for status
information only and are not configurable on this page.
as the settings for each wireless interface. The displayed settings are for status
information only and are not configurable on this page.
Figure 2-2. System Information
The displayed items on this page can be described as follows:
AP System Configuration – Displays basic system configuration settings:
• System Up Time – Length of time since the access point was powered on.
• MAC Address – The physical layer address for the access point’s Ethernet port.
• IP Address – The IP address configured on the access point.
• IP Default Gateway – The IP address of the gateway router between the access
• MAC Address – The physical layer address for the access point’s Ethernet port.
• IP Address – The IP address configured on the access point.
• IP Default Gateway – The IP address of the gateway router between the access
point and management stations that exist on other network segments.