AMX WAP250G User Manual
System Configuration
2-8
2
Operation Mode
The device can be set as an access point, a wireless repeater or a wireless bridge
according to user’s need.
according to user’s need.
Figure 2-7. Administration Password
There are three operation modes:
• AP — Set the device as an Access Point.
• Repeater — Set the device as a Wireless Repeater to relay messages between
subnetworks that use different protocols or cable types. The Root AP MAC
Address can be assigned manually or selected after click “Scan”.
Address can be assigned manually or selected after click “Scan”.
• Bridge — Set the device as a Wireless Bridge to connect two local-area networks
(LANs), or two segments of the same LAN that use the same protocol. The Bridge
Nodes need to be assigned manually by the user.
Nodes need to be assigned manually by the user.
Reboot System
The Reboot System page allows you to restart the access point software and restore
factory default settings.
factory default settings.
Figure 2-8. Reboot System