Tecom Co Ltd 402421 User Manual

VTECH TELECOMMUNICATIONS LTD.

File :VT40-2421
MMI REV 4.doc

Date : 15 Nov, 2000

TITLE : INTERNAL PRODUCT SPECIFICATION

DOCUMENT NO.

VT40-2421 MMI

REV NO.

PAGE

11 of 43

5.3.

CHARGER

5.3.1. CHARGING LED

This LED is used to indicate the charging status of the handset.

5.3.2. SPARE BATT LED

This LED lights, illuminate a spare battery pack has been installed on the charger in
charging condition.

5.4.

LCD on the handset

The LCD of the handset is 2*16 dot matrix with some icons. The top two rows are 2*16 dot matrix.

The 3

and 4

row is icons and 7-segment display. The full LCD is.

2*16 dot matrix
It displays handset ID in standby mode (eg Handset ID is 01).

Handset & CO Line
There are 4 CO lines, 1, 2, 3, and 4

& CO line OFF: CO Line is idle

ON & CO line ON: CO Line is in use

& CO line FLASH: CO Line is held

If the CO line is disconnected,

& CO line is OFF

Ringer
%: Ringer is set to OFF

%FLASH: CO Line is ringing
Press [s

s ] / [t

t ] in idle mode or ringing mode to adjust the ringer volume

Ringer and Handset
Both ringer and Handset icon FLASH: Transfer ring or recall ring

Battery Icon
This icon represents the battery status

NEW Icon
This icon is for new caller ID messages if there is new caller ID in database in idle mode or in retrieve mode.

Caller Counter Icon (eg 25 in fig.1)
This icon has three purposes.
a)  New caller ID counter (NEW icon is on)
It means there are 25 new caller ID in database.
Or

XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
NEW 25 9/02 11:09