Lectrosonics Inc DB User Manual
DSW Digital Wireless System
Rio Rancho, NM
5
Receiver Rear Panel
Antenna connections
Standard 50 ohm BNC jacks accept input from the an-
tennas. A built-in multi-coupler distributes the antenna
signal to the six receiver modules, and also to the OUT
jack to deliver the signal to an additional receiver.
tennas. A built-in multi-coupler distributes the antenna
signal to the six receiver modules, and also to the OUT
jack to deliver the signal to an additional receiver.
Audio Outputs
Each XLR connector provides a balanced analog
output. AES-EBU digital audio is provided on jacks 1, 3
and 5 as marked on the rear panel.
output. AES-EBU digital audio is provided on jacks 1, 3
and 5 as marked on the rear panel.
Ethernet Port
Network connection is provided on a standard RJ-45
connector.
connector.
( )
( )
AES
WORD
CLOCK
ANT
PWR
AES
5 & 6
AES
3 & 4
AES
1 & 2
ANT
PWR
Antenna
input A
Antenna
input B
Antenna loop-thru
output
Antenna loop-thru
output
RS-232
serial port
Digital audio word
clock ports
Ethernet
port
Balanced audio outputs
channels 1 - 3
Audio outputs
channels 4 - 6
AES output
channels
AES output
channels
Antenna cable
front panel
pass-thru
AES Word Clock
The receiver can sync to an external clock signal or
generate a clock signal and function as the master.
generate a clock signal and function as the master.
RS-232 Port
For use with third party control systems or a direct
connection to a PC.
connection to a PC.
Antenna Cable Front Panel Pass-thru
A coaxial cable can be routed from the rear panel BNC
connectors to BNC connectors on the left and right
side of the front panel. The coaxial cable is routed
through the inside of the receiver chassis.
connectors to BNC connectors on the left and right
side of the front panel. The coaxial cable is routed
through the inside of the receiver chassis.
Power Supply
The receiver is powered from an external power sup-
ply, 10 –18 VDC, 4A.
ply, 10 –18 VDC, 4A.