Sennheiser Electronic Corp RR5000 User Manual
DE
FR
ES
EN
Using additional functions EN
RS 5000
| 25
1
Disconnect the transmitter from the power supply system
by unplugging the connector of the power supply unit.
by unplugging the connector of the power supply unit.
2
Keep the Hearing profile button pressed and connect the
transmitter to the power supply system by connecting the
connector of the power supply unit to the yellow socket of
the transmitter.
transmitter to the power supply system by connecting the
connector of the power supply unit to the yellow socket of
the transmitter.
The protected settings mode is activated. The
Transmitter
status
LED flashes blue. The LED segments indicate the cur-
rent settings as specified in the following chapters:
• battery status display (see page 25)
• charging reminder function (see page 26)
• hearing profile and balance protection (see page 27)
• battery status display (see page 25)
• charging reminder function (see page 26)
• hearing profile and balance protection (see page 27)
Deactivating the protected settings mode and saving the
advanced settings
advanced settings
To save the advanced settings and to deactivate the pro-
tected settings mode:
tected settings mode:
3
Disconnect the transmitter from the power supply system
by unplugging the connector of the power supply unit.
by unplugging the connector of the power supply unit.
Battery status display
This setting is saved on the transmitter, independent of the
stethoset receiver you are using.
stethoset receiver you are using.
To change the battery status display:
왘
Make sure that the protected settings mode is activated
(see page 24).
(see page 24).
2
1
3
RS_5000_570727_0117_PRT.book Seite 25 Montag, 10. Oktober 2016 2:52 14