OMG plc VICP1 User Manual

Origin 
Setup & 
Maintenance 
Guide 

Vicon Motion Systems Ltd.

04-Sep-2018

Page 19 of 45

Unpair a cluster

You can unpair a cluster from a Beacon within Evoke if it is currently 

connected. To do this:

1. Ensure that the current Beacon is not in pairing mode at this point, or 

the cluster will reconnect to it.

2. On the System tab, right-click the cluster and from the context menu, 

choose the Unpair option.

The cluster pairing channel is cleared, so it immediately enters pairing 

mode to search for a new Beacon.

• The Beacon clears its record of the cluster.

• The cluster entry is cleared from the System tab.

If the cluster is not connected to a Beacon, you can unpair it using the 

multi-function button on the cluster. To do this:

1. Hold the power button for 4 seconds 

(TBC)

 then release.

The cluster reboots and starts a flash sequence to indicate that it can 

be unpaired for 10 seconds.

2. Press the button twice to unpair the cluster.

It automatically returns to pairing mode, searching for Beacons in 

pairing mode.