Checkpoint Systems Inc. NGL User Manual
Classic Style Installation Manual
Rev. *60
11 of 27
C H A P T E R
3
P H Y S I C A L I N S T A L L A T I O N
Overview
This chapter covers the physical placement and installation of the TR4215 antennas and power
supply in the following sections:
supply in the following sections:
1. Placement: How to determine the proper placement of the antennas.
2. Power Supply: Information on typical power supply placement.
3. Wire Routing: Information on typical wire routing methods.
4. Antenna Mounting: Antenna mounting information.
2. Power Supply: Information on typical power supply placement.
3. Wire Routing: Information on typical wire routing methods.
4. Antenna Mounting: Antenna mounting information.
Note: For details of placement, refer to NGL installation manual, CKP P/N 7360602.
Aisle Width
The maximum aisle width for the Classic Style antennas (with 410EP tag) is:
Classic Style antennas (PSB/SSB) – 1.8 m [6 ft]
Classic Style antennas are composed of:
Pedestal Classic Style NGL PSB (call it PSB for short, CKP P/N 10104118)
Pedestal Classic Style NGL SSB (call it SSB for short, CKP P/N 10104133)
Pedestal Classic Style NGL SSB (call it SSB for short, CKP P/N 10104133)
System performance is affected by aisle width and tag type. For aisle width details please refer to
the TR4215 Product Reference Guide.
the TR4215 Product Reference Guide.
Power Supply
Classic Style with coupler antennas utilizes a +24 VDC power supply.
Placement
The power supply can be placed near the system, under a cashwrap counter, under shelving, above
the drop ceiling (if using plenum-rated cabling), or in a nearby utility closet.
the drop ceiling (if using plenum-rated cabling), or in a nearby utility closet.
Placement Requirements:
The power supply must be within 18m [60ft] of the furthest antenna.
The power supply must be placed no higher than what is accessible from a store ladder.
The power supply must be placed no higher than what is accessible from a store ladder.