Meizhizun Electronic Technology Co Ltd.of Dongguan City TR748197 User Manual

Page of 1
Cover
Manual Will Fold shut like so
Note: Separation distances vary based upon environment and 
your customized settings.
Warning: The alarm can cause temporary or permanent 
hearing loss if placed close to the ear.
Receiving A Call
  
 Bluetooth key chain will vibrate, flash and ring when a call 
comes in.
  
  Tap the button once to answer the call with the Bluetooth 
key chain.
  
 Tap the button twice to end the call.
During A Call
  
 Tap the button once to transfer the call from your mobile 
phone to the Bluetooth key chain.
  
 Tap the button once again to transfer the call from the 
Bluetooth key chain to your mobile phone.
  
 Tap the button twice to end the call.
Making A Call 
  
 When the call is ringing, tap the button once to transfer the 
outgoing call to the Bluetooth key chain.
5. If the first connection is not successful, remove the device   
     from the phone and try again.
6. Once connected, the button light will flash every few 
seconds 
     to show that it is on.
7. To disable Blutetooth, Turn off Bluetooth feature on phone.  
     To reconnect to a different phone follow instructions #1-6.
Using your Blue tooth Key Chain
 
Playing Music
  
 Ensure your phone and the Bluetooth key chain are paired.
  
 After pairing, play the music from your mobile phone and the 
Bluetooth key chain will work at the same time.
  
 Volume can be adjusted by your mobile phone
  
 Press Bluetooth Key chain Button once to play or pause the 
music.
  
 Close music from your mobile phone to stop playing the 
music from the Bluetooth key chain.
Separation Alarm
  
 When your mobile phone and the Bluetooth key chain 
become separated (30-120feet), it will alert you by vibrating, 
flashing its lights and then sounding an alarm.
  
 To cancel the alarm, tap the button once. The alarm will 
continue as long as separated.
  
 If Bluetooth connection is lost with your phone, or your 
phone is turned off while paired with the key chain the same 
alarm will occur.
  
 To avoid unnecessary alerts, turn off the Bluetooth key chain 
before turning off your phone.
Charging The Device
      Gently open the dust cover to expose the micro USB port.
      Insert the micro USB charge cable into the key chain port 
and then insert the USB plug into any standard USB port.
    The LED indicator will remain on when charging. When 
charged, the lights will turn off. For best battery life, charge the 
key chain for 4 hours.
   Low battery Alert: The device will sound two short beeps 
every few minutes when the battery level is low.
To Turn on the Device
   Press and hold the button for 4 seconds then release the 
button, the Bluetooth feature is enabled at the same time,
you will hear one beeps.
  The Bluetooth key chain will automatically reconnect to the 
last paired mobile phone.
To Turn Off the Device
   Press and hold the button for 4 seconds then release the 
button. 
   The light will turn off and you will hear 1 beep.
Pairing With Your Phone
1. Ensure your phone is turned on and the Bluetooth feature is 
     enabled.
2. Press and hold the button of the device until you hear the 
     beep (4 seconds).
3. On your phone, search for the Bluetooth device named 
“Things Remembered Keychain ”
4. On your phone, connect to “Things Remembered Keychain” 
device, if password is required enter 0000.
Emergency Device Operations
 
  In the event of an emergency, you can use your 
Bluetooth keychain to call emergency services for 
assistance.
 
  Press and hold the button for 9 seconds.
 
  Release the button after the device notified you it is 
dialing emergency service.
 
  The Bluetooth keychain will then initiate an emergency 
call using your mobile phone and will serve as a 
speakerphone for the call.
  
    
Tap the button once during the call to transfer the call 
from the Bluetooth key chain to your mobile phone.
Tap the button once again to transfer the call from your 
mobile to the Bluetooth key chain.
Tap the button twice to end the call.
   Warning: Only use the feature in the event of an actual 
emergency.
Resetting The Bluetooth Key chain 
  
 If the device stops functioning, insert a small sharp clip into 
the reset button hole. Resetting the Bluetooth key chain will 
turn it off. When turned back on. It will return to normal 
operating mode.
Bluetooth is a trademark of Bluetooth SIG, Inc. and any use of such marks by 
Free-wings is under license.
OPERATION MANUAL
®
Bluetooth Key Chain
4.56 in
8.25 in
2.75 in
4.56 in
2.75 in
2.75 in
DO NO
T PRINT PURPLE LINES
w
w
w
.thingsr
emember
ed
.c
om
DO NO
T PRINT PURPLE LINES
w
w
w
.thingsr
emember
ed
.c
om
Dotted line are fold lines
Dotted line are fold lines
www.thingsremembered.com
MIC
R/L  alert  lights
R/L  alert  lights
Roof 
cover
Reset
Button
Control
Button
Control
Button
Down alert lights
Speaker
Dust  cover