TouchTunes Interactive Networks TT-6700 User Manual

1) Plug the connector of the power adaptor into the socket of power Source, please make sure the power 
voltage is AC 230V/50-60Hz.

2) Turn on the power switch, the power indicator lights.

3) Pull out the antenna A & B and make them perpendicular to the unit.

4) 2 -Audio Output Connection (auto-selecting): If the mix output is needed, only use 1 audio output cable and 
connect it with any output socket. If independent output is required, please connect another cable.

5) The "RF" indicator of receiver will light when turning on the transmitter. Swivel the volume knob to adjust the 
sound.

6) When not using the receiver for a long time, please disconnect it from the power adaptor.