Uniden America Corporation UB348 User Manual

47

•

Press Func + 

 or Func + 

 to select a 

skipped frequency while 

 appears. 

 

appears when you select a skipped frequency.

Sometimes a user might pause before replying to a 
transmission. To avoid missing a reply on a specific 
channel, you can program a 2-second delay into any 
channel or frequency. The scanner continues to 
monitor the channel frequency for an additional 
2 seconds after the transmission stops before 
resuming scanning or searching. The scanner 
automatically sets a delay when you store 
frequencies into channels or when you search 
frequencies. When the delay feature is on, 

 

appears. If it is off, follow one of these steps to 
program a delay depending on how the scanner is 
operating,.

•

If the scanner is scanning and stops on an active 
channel where you want to store a delay, quickly 
press Func + Dly before it continues scanning 
again. 

 appears.

•

If the desired channel is not selected, manually 
select the channel, then press Func + Dly. 

 

appears.

•

If the scanner is searching, press Func + Dly 
while the scanner is searching. 

 appears 

and the scanner automatically adds a 2-second 
delay to every frequency it stops on in that band.

To turn off the 2-second delay, press Func + Dly 
while the scanner is monitoring a channel, scanning, 
or searching. 

 disappears.