Uniden America Corporation UB351 User Manual

 
Thank you for purchasing your PRO-160 1,000 Channel Trunking Desktop/Mobile Scanner from 
RadioShack. Your scanner is one of a new generation of scanners designed to track Motorola

® 

Type 

I, Type II, hybrid analog, and many other systems.   

Scanner   
AC adapter 
DC cable with fuse   
Antenna 
DIN sleeve   
Removal keys (2) 
Mounting bracket   
Knobs (2) 
Lock washers (2)   
Screws (2) 
Rubber feet (4)   
User’s guide 
Preprogrammed frequency sheet 
 

You can mount your scanner as a base station or in your vehicle. If you are unsure how to install our 
scanner in your vehicle, consult your automobile manufacturer, dealer, or a qualified installer. 
 

Attach the four protective rubber feet to the mounting bracket when you use the scanner as a base 
station on a flat surface such as a desk, shelf, or table. Because the speaker is on the bottom of the 
scanner, you can use the mounting bracket to elevate your scanner off the surface for better sound. 
 

To mount your scanner under or over the dashboard, use the mounting bracket. Before installing, 
confirm that your scanner fits in the desired mounting area and you have all the necessary materials 
to complete the task. 
 
IMPORTANT: AVOID AIRBAG DEPLOYMENT ZONES. This can prevent the airbag from 
performing properly and result in injury.   
 

1

. Use the supplied mounting bracket as a template to mark positions for the two mounting screws. 

2

. At the marked positions, drill holes slightly smaller than the screws. When drilling holes, be sure to 

avoid obstructions and wires behind the mounting surface. 

3

. Attach the mounting bracket to the surface using the supplied screws. 

4

. Slide the scanner into the bracket, aligning the scanner’s holes with the holes in the bracket, and 

then screw the mounting knobs into the scanner. 

Note: Wording required for FCC PART 15.21 
is shown in page 35/36.