International Business Machines Corporation CORN1TASULIV User Manual
v If the standby status indicator is on (in green), press Fn to resume from the
standby mode.
v If you are using the ac adapter, or using the battery, and the battery status
indicator is on (in green), press Fn+Home to make the screen brighter.
v If you attach an external monitor to your computer, press Fn+F7 to switch
the screen output location.
v If the problem persists, do the “Solution” in the problem below.
Problem:
The screen is unreadable or distorted.
Solution:
Make sure that:
v The display device driver is installed correctly.
v The display resolution and color depth are correctly set.
v The monitor type is correct.
v The display resolution and color depth are correctly set.
v The monitor type is correct.
To check these settings, do as follows:
Open the Display Properties window.
Open the Display Properties window.
For Windows 98:
1.
Click the Settings tab.
2.
Check if the color depth and resolution are correctly set.
3.
Click Advanced...
4.
Click the Adapter tab.
5.
Make sure “S3 Graphics, Inc. SuperSavage/IXC SDR” is shown in the
adapter information window.
adapter information window.
6.
Click the Monitor tab.
7.
Make sure the information is correct.
For Windows 2000 and Windows XP:
1.
Click the Settings tab.
2.
Check whether the color depth and resolution are correctly set.
3.
Click Advanced...
4.
Click the Adapter tab.
5.
Make sure “S3 Graphics, Inc. SuperSavage/IXC” is shown in the adapter
information window.
information window.
6.
Click the Monitor tab.
7.
Make sure the monitor type is correct.
For Windows NT:
1.
Click the Settings tab.
Solving computer problems
Chapter 2. Solving computer problems
21