Honeywell International Inc. 9PGTPL-100A User Manual
Page 1005
1 Mar 2006
34-45-54
MAINTENANCE MANUAL
TPL-100A Processor / Part No. 940-0530-001
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
Figure 1001. Test Pattern
2
After the RA/VSI sequential lamp test, the red and green climb/descend
lamps display a fixed test command which represents a typical resolution
advisory throughout the remainder of the test sequence.
lamps display a fixed test command which represents a typical resolution
advisory throughout the remainder of the test sequence.
NOTE: Loss of valid vertical speed input causes the VSI flag to appear on
the RA/VSI. If a TA/VSI is used, the legend "VSI" appears on the
display. A MILACAS-FR Processor failure causes the TCAS flag to
appear on the RA/VSI, and TCAS to be shown on the TA/VSI.
display. A MILACAS-FR Processor failure causes the TCAS flag to
appear on the RA/VSI, and TCAS to be shown on the TA/VSI.
(c) For aircraft equipped with TA/VSI
The TA/VSI shows a fixed resolution advisory and the traffic symbol test pattern.
A "TEST" message is indicated.
A "TEST" message is indicated.
(d) For aircraft equipped with PPI radar/TCAS or dedicated display:
The PPI or dedicated display shows the TCAS display test pattern and "TEST" is
displayed.
displayed.