Sharp Corporation HRO00192 User Manual

The followings are the explanation of how to charge the 
internal battery by connecting the product to a USB 
port of a PC through which the battery can be charged.

Protruding edges

External 

connection jack

USB port of a PC

microUSB cable 01

(sold separately)

 

◎ If you use the microUSB cable to charge the internal 

battery, it may take the internal battery longer to be fully 
charged than if you use the specified AC adapter (sold 
separately).

 

◎ Turn the protruding side of the microUSB plug down and 

insert the microUSB plug to the external connection jack of 
the product straightly. Inserting the microUSB plug in the 
wrong direction may result in damage to the external 
connection jack of the product.

 

◎ The product is turned on when it is connected to a PC while 

the power is turned off.

 

◎ If you charge the internal battery when the battery has run 

out, the charging/incoming/key indicator may not illuminate. 
In such case, use the specified AC adapter (sold 
separately) for charging.

■ Turning the Power On

f (hold down for at least 2 seconds).

 

◎ The initial setting of the touch panel will be executed until 

“AQUOS PHONE” disappears from the screen after the 
power is turned on. Do not touch the screen, otherwise 
touch panel operations may not be performed properly.