Top Victory Electronics Co Ltd LM1560 User Manual
9
Adjust brightness or function adjustment.
•
Auto Config Key / EXIT:
1. When OSD menu is in active status, this knob will act as EXIT-KEY
(EXIT OSD menu)
2. When OSD menu is in off statu s, press this knob over 1 seconds to
be
in Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus automatically.
NOTES
•
Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
dust or mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To maintain the cleanness of your LCD display, wipe it periodically with
clean and soft cloth. The screen may be damaged by any liquid splash.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As
a safety precaution, always unplug the monitor before cleaning it.
The monitor controls are accessed by pressing button MENU to enable OSD
(On-Screen-Display). The main menu will be displayed as follows (see
figure 5 ). If OSD window is in Chinese when power on (see figure 6), press
the Contrast/UP Key or Brightness/Down Key to choose the next window.
Choose the English, then press MENU Key for confirming. OSD window will
display in English.
1. Press the MENU-Key to show the OSD window. See figure 6.
2. Press
(On-Screen-Display). The main menu will be displayed as follows (see
figure 5 ). If OSD window is in Chinese when power on (see figure 6), press
the Contrast/UP Key or Brightness/Down Key to choose the next window.
Choose the English, then press MENU Key for confirming. OSD window will
display in English.
1. Press the MENU-Key to show the OSD window. See figure 6.
2. Press
or
to select the adjusted item, then press the MENU-key.
3. Press
or
to change the settings of selected item. Press MENU-key
when desired setting is done.
4. If you want to adjust any other items, repeat steps 2 -4.
HOW TO ADJUST A SETTING